NT Labs pre mixed Formaldehyde and Malachite Green pond treatmenr.
For the treatment of parasitic infections such as: White spot, Trichodina, Costia and Chilodonella.
This has the same ingredients as Tetra Pond Medifin although almost twice as concentrated!
When to use:
When fish show symptoms of a parasitic or fungal infection, including white spots along the fins and body, flicking and rubbing, gasping at the surface, an opaque film over the body or fluffy, white growths.
How to use:
- Test your water quality
- Mix the appropriate dosage in a clean bucket of pond water, pour evenly over the surface of the pond and leave for 7 days.
- If you feel a repeat dose is necessary, check your diagnosis carefully using the Diagnosis Tool; a different medication may be more suitable. Allow 7 days and perform a partial water change before re-treating or treating with a different medication.
- Always treat when you have time to observe fish and take appropriate action in the unlikely event of a bad reaction.
Dosage:
Use 10ml per 80 gallons (364 litres).
- 250ml treats 2,000 gallons (9,000 litres)
- 500ml treats 4,000 gallons (18,000 litres)
- 1000ml treats 8,000 gallons (36,000 litres)
Warning:
- Do not use with orfe, rudd, tench or sturgeon/sterlet.
- Do not use if the water temperature is above 30°C.
- Do not use in hot, humid, thundery conditions.
- Do not mix medications.
